Pelco FR85011MSTR 1 Channel Video RX With Bi-directional Data Fiber Transmitter

Description

PELCO 1Ch Video RX With Bi-Directional Data
Digital 1310nm / 850nm Video / Bidirectional Data Multimode Fiber Rx, ST Connector
The FT85011AMSTR /
FR85011AMSTR
fiber transmitter and receiver provides the ability to transmit on unidirectional composite video channel and one bidirectional data channel over on optical fiber. In addition, patent-pending technology provides the solution for allowing Coaxitron® pan/tilt/zoom (PTZ) control data to be transmitted the full distance of the fiber (up to 6 km for multi-mode fiber and up to 46 km for single-mode fiber).
Features of the FT85011AMSTR / FR85011AMSTR fiber optic transmission system include the following:
8-bit digitally encoded video for high-quality video transmission over a single fiber
Bidirectional data channel that supports RS-232, RS-422, RS-485 (2-wire / 4-wire), Manchester, Bi-Phase, and Coaxitron® communication
Patent-pending transmission technology allowing for Coaxitron® control at full-distance capabilities
Integrated wavelength division multiplexing (WDM), allowing video and data channels to be transmitted in the same fiver using different wavelengths
Multi-mode fiber support for distances up to 6 km
Single-mode fiber support for distances up to 46 km
Exceeds all requirements for the RS-250C Medium-Haul Transmission specification
Compatible with NTSC, PAL, and SECAM video standards
Meets NEMA TS 2 and Caltrans traffic signal control equipment standards for ambient operation temperature, mechanical shock and vibration, humidity with condensation, high-line / low-line voltage conditions, and transient voltage protection.
NOTE:
Conformal coating is required for operation in environments with relative humidity above 95% (condensing).
No performance adjustments required
12 VDC or 24 VAC power supply
Stand-alone and rack-mountable modular design
LED indicators for monitoring of signal status, laser status, data activity, and operating power
Video
Data
Number of Channels: 1
Number of Channels: 1
Modulation Type: Pulse code modulation, 8-bit resolution
Data Communication: RS-232, RS-422, RS-485 (2-wire / 4-wire), Manchester, Bi-Phase, Coaxitron®
Video Input: 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM
Maximum Baud Rate: 500 kbps
Bandwidth: 6.5 MHz
Gain: Unity
Signal-to-Noise Ratio: >60 dB (CCIR weighted)
General
Mechanical (Connectors)
Operating Temperature: -40° to167°F (-40° to 75°C)
Video: BNC
Input Power Requirements: 12 VDC or 24 VAC, 300 mA
Rack Power / Alarm: 4-pin connector
LED Indicators: Power, Video Present, Optic Fault, Data Tx, Data Rx
Stand-Alone Power: 2-pin connector, screw terminal
Dimensions: 8.75" D x 1.08" W x 4.81" H (22.23 x 2.74 x 12.22 cm)
Data: 9-pin connector, screw terminal
Unit Weight: 1.48 lb. (0.67 kg)
Fiber Optic: ST for multi-mode fiber
Item #535-3-1