NEW Pelco IMP319-1ES Sarix 3MP Outdoor Network Mini Dome Surface Mt.

Description

New
Pelco Sarix IME319-1ES
3MP Surface Mount
Environmental Day/Night Mini Dome
IP Camera with 3 to 9mm Lens
The light gray
Sarix IME Series IME319-1ES 3MP Surface Mount Environmental Day/Night Mini Dome IP Camera
from
Pelco
features SureVision 2.0 technology, delivering high-definition (HD) resolution, consistent color accuracy, fast processing power, and simultaneous advanced low-light performance with Wide Dynamic Range (WDR), and Anti-Bloom technologies. Advanced features include 3D noise filtering, smooth response to illumination changes, and improved tone mapping to retain color accuracy and overall image contrast.
This Sarix Enhanced Range Mini Dome IP Camera features an integrated 3 to 9mm varifocal autofocus lens. Designed to install quickly, the camera includes autofocus, motorized zoom, built-in analytics, and other advanced features needed for demanding security applications. In addition, a ready-to-install in-ceiling mount is included.
The camera supports multiple simultaneous video streams with up to two different configurations. The streams can be compressed in MJPEG and H.264 formats across several resolution configurations. Realtime video with Full HD resolution using H.264 compression allows for optimized bandwidth and storage efficiency. The streams can be configured to a variety of frame rates, bit rates, and group of picture (GOP) structures for additional bandwidth administration.
This mini dome IP camera seamlessly connects to Pelco video management systems such as Endura version 2.0 (or later) and Digital Sentry version 7.3 (or later). It also integrates with major third-party video management systems through the Pelco API, and other third-party software and systems through the open ONVIF Profile S standard.
Adaptive motion detection allows the camera to record or send an alarm when there is motion in selected zones or in an entire scene. A camera sabotage alarm is triggered if the lens is obstructed or when the camera is repositioned. The Power over Ethernet (PoE) functionality reduces simplifies planning, wiring, and installation. The camera works with PoE-enabled network switches or power injectors, eliminating the need for separate power supplies and cabling, and increasing camera fail-safety through an uninterruptible power supply (UPS).
Camera
Day/night capability
3 to 9mm autofocus varifocal lens
Power over Ethernet (PoE), IEEE 802.3af
Adaptive motion detection and camera sabotage analytics
Adaptive motion detection and camera sabotage analytics
Compatible with Pelco and third-party video systems
ONVIF Profile S and Profile G conformant
SureVision 2.0 Technology
True Wide Dynamic Range (WDR)
Advanced low-light performance
Anti-Bloom Technology
3D noise filtering
Enhanced tone mapping retains color accuracy and image contrast
Mount
Attaches to standard 4" (10.2 cm) square outlet box and standard 2-gang electrical box
3/4" NPT or 25mm conduit attachments on side and top of back box
Meets IP66 and NEMA Type 4X
Meets IK10++ (50J)
Alodine aluminum construction
Features :
Camera
Sensor
1/3" CMOS
Sensor Resolution
3 MP, 2048 x 1536
Imager Readout
Progressive scan
Signal to Noise Ratio
>60 dB
Electronic Shutter
1 to 1/77,000 sec
Wide Dynamic Range
Up to 100 dB
White Balance
Range: 2,000 to 10,000 K
Sensitivity
@f/1.2, 2,850K, SNR >20 dB:
Color (33 ms): 0.1 lux
Color (500 ms): 0.005 lux
Mono (33 ms): 0.05 lux
Mono (500 ms): 0.0013 lux
Mechanical IR Cut Filter
Yes, (On/Off/Auto selectable) with different set points on lux
Lens
Type
Built-in, varifocal
Focal Length
f/1.2, 3 to 9 mm
Focus Type
Autofocus, motorized
Zoom
Remote
Auto Iris
DC drive P-iris
Field of View
4:3 Mode:
Diagonal: 105° (W), 38° (T)
Horizontal: 84° (W), 30° (T)
Vertical: 63° (W), 23° (T)
16:9 Mode:
Diagonal: 97° (W), 35° (T)
Horizontal: 84° (W), 30° (T)
Vertical: 47° (W), 17° (T)
Audio
Streaming
Bidirectional (full or half duplex)
Input/Output
Line level/external microphone input; 600Ω differential, 1 Vpp maximum signal level; built-in microphone
Compression
G.711 PCM 8-bit, 8 kHz mono at 64 kb/s
Video
Video Streams
Multiple simultaneous streams with up to 2 different configurations plus service stream; the secondary stream is variable based on the setup of the primary stream
Available Resolutions
4:3 Aspect Ratio:
2048 x 1536 (3.0 MP) @ 9.2 Mb/s
16:9 Aspect Ratio:
1920 x 1080 (1080p) @ 6 Mb/s
Supported Frame Rates
Up to 30, 25, 15, 12.5, 10, 5, 1 fps (depending on the coding, resolution, and stream configuration)
Video Encoding
H.264 High, Main, or Base profiles; MJPEG
Bitrate Control
Constrained variable bit rate (CVBR), constant bit rate (CBR), and variable bit rate (VBR) with target range
Stream Type
Service Stream: JPEG stream
Network
Port
RJ-45 connector for 100Base-TX Auto MDI/MDI-X
Cable Type
CAT5 or better for 100Base-TX
Supported Protocols
TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, ARP, ICMP, and 802.1x (EAP)
Users
Unicast: Up to 20 simultaneous users depending on the resolution settings
Multicast: Unlimited users H.264
Security Access
Password protected
Software
Interface
Web browser view and setup
Languages Supported
English, French, Italian, German, Spanish, Portuguese, Russian, Chinese, Turkish
Features
16 window blanks, configurable in size
Password protection
Snapshot with JPEG capture at 2016 x 1523 resolution
Text overlays for camera name, time, date
Alarm
Supported
Unsupervised: Detects open or closed alarm state
Supervised: Detects open and short alarm state with external 1 kΩ resistor
Input
3.5 VDC maximum, 3.5 mA maximum
Minimum System Requirements
Processor
Intel Core i3, 2.4 GHz
Operating System
Microsoft Windows Vista / 7 (32-and 64-bit)
Mac OS X 10.4
RAM
4 GB
Network Interface
100 Mb/s
Monitor
Minimum 1024 x 768 resolution, 16 or 32-bit color
Web Browser
Internet Explorer 7.0 (or later) or Mozilla Firefox 3.5 (or later)
Internet Explorer 8.0 (or later) is recommended for configuring analytics
Media Player
Pelco Media Player or QuickTime 7.6.5 for Windows 7, XP, or Vista
QuickTime 7.6.4 for Mac OS X 10.4 (or later)
Analytics
Requirements
For Pelco Analytics:
Pelco Interface: WS5200 Advanced System Management
Software on an Endura 2.0 (or later) system
Open API: The Pelco API can transmit behavior alarm data to third-party applications (available on the Pelco Developer Network website)
Integration
Pelco System Integration
Endura 2.0 (or later)
Digital Sentry 7.3 (or later)
DX4700/DX4800
Other
Open API: Pelco API or ONVIF Profile S
Mobile Application: Integrated with Pelco Mobile Application
Certifications
Certifications and Compliance
CE (Class A), FCC (Class A), KCC, C-Tick, CB
UL/cUL listed
Compliant with applicable immunity sections of EN 50155, EN 50121-3-2, and EN 50121-4
Cisco Medianet Media Services Proxy 2.0 compatible
ONVIF Profile S conformant
MTBF ≥200,000 POH (reporting standard is RELEX Modeling)
Power
Input Power
PoE (IEEE 802.3af, Class 3)
Power Consumption
8.5 W nominal
Current Consumption
350 mA maximum
Relay Output
±32 VDC maximum, 150 mA maximum
Environmental
Temperature
Operating: -40 to 122°F (-40 to 50°C)
Storage: 14 to 140°F (-10 to 60°C)
Cold Start
-4°F (-20°C)
Humidity
Operating: 10 to 95% (condensing)
Storage: 20 to 80% (non-condensing)
Impact Resistance
K10++ (50J) per IEC 62262
Shock and Vibration
EN50155 CAT1, Class B; IEC 60068:2-6 and 2-27
Genera
l
Mount Type
Surface
Dome Attenuation
Clear: f/0.0 light loss
Smoked: f/1.0 light loss
Pan/Tilt Adjustment
Manual: 355° pan, 180° tilt, 360° rotation
Local Storage
microSD (Up to 32 GB with separately sold microSDHC card)
Accessory Ports and Connectors
Micro USB type B connector for Pelco accessories
Dimensions (Ø x H)
6.22 x 4.62" (15.7 x 11.7 cm)
Dome Diameter
3.85" (9.77 cm)
Weight
3.3 lb (1.5 kg)