NEW Pelco Gray Mount Pole Adapter SWM-PA-GY for SWM Series Spectra/ DF5 Series

Description

NEW Pelco Gray Mount Pole Adapter SWM-PA-GY  for SWM Series Spectra/ DF5 Series
**Note this is the Mount pole adapter only (no camera or anything else is included-   Open boxed unit, what you will get is factory sealed**
Pelco's SWM-PA-GY Pole Adapter for SWM Series Spectra or DF5 Series Pendant Domes (Gray) is used along with the SWM-GY Wall Mount (sold separately) when hanging a Pendant Dome from a pole.
Pole Adapter straps to a vertical column to provide a sturdy interface for Pelco's Wall Mount. The Adapter is pre-drilled to allow cables through.
Brand          Pelco
Item model number      SWM-PA-GY
Item Weight         11.2 ounces
Product Dimensions      6 x 4 x 4 inches
Item Dimensions LxWxH        6 x 4 x 4 inches
Manufacturer       PELCO
ASIN  B003Y04GXU
WALL MOUNT, SPECTRA, DF5, AND SARIX ID AND IE SERIES PENDANT DOMES
Product Features
For Use with Pelco Pendant Domes (Spectra, DF5, and Sarix ID and IE Series) that Require a 1.5-inch NPT Pipe Thread for Installation
Low Cost
Constructed of Cast Aluminum
Cable Feedthrough Features
Supports up to 4.5 kg (10 lb)
Easy to Install, Using a Mounting Plate and Standard Tools
Mounting Hardware is Concealed Within the SWM, Providing a Very Attractive Appearance
Mounts Directly to a Vertical Load-Bearing Surface for Wall Mount Applications
Can be used with the SWM-PA Series Pole Adapter or SWM-CA Series Corner Adapter
For Indoor or Outdoor Applications
The SWM Series indoor/outdoor wall mounts are designed primarily for use with Pelco pendant domes including Spectra, DF5, and Sarix
ID and IE Series. They can also be used with other pendant domes that require a 1.5-inch NPT pipe thread for installation. Its unique design conceals the mounting bolts inside the mount. It is easy to install and requires no special tools. A gasket is affixed to the base to protect the interior from moisture.
A feedthrough opening in the mounting surface allows for easy routing of video and power cables. Because of its compact size, the mount is not suitable for use with conduit fittings. A 1.5-inch NPT pipe thread is provided in the mount to attach the pendant dome. For Sarix installations, the SWM Series wall mounts require a Sarix pendant mount adapter: the ID-P is required for Sarix ID Series domes, and the IE-P is required for Sarix IE Series domes.
Accessories for the wall mount include the SWM-PA Series pole adapter and the SWM-CA Series corner adapter. The corner adapter allows the wall mount to be attached to the corner of a building. The SWM-CA24 corner adapter includes a 100 VA transformer that converts 120 or 230 VAC input to 24 VAC output. When installed with Sarix IE Series domes, the power from the SWM-CA24 mount is used for the dome heater.
The wall mount and adapters are constructed of aluminum with a polyester powder coat finish. The wall mount is gray.
Features
Attach Pendant Domes to Poles
Cable Management
Easy to Install
Specs
Manufacturer Pelco
Condition New
Construction Straps: Stainless Steel Mounting Plate: Aluminum
STOCK# BSM-RM3- P-102A